What should Indian Sandstone be laid on?

How thick should mortar be under slabs?

Add a mortar bed

The mortar should be damp, not runny. Spread it out and level it with a trowel. The mortar bed needs to be 30-40mm thick and should enable the slabs, when positioned, to sit 6-10mm high.

Does Indian sandstone need sealing before laying?

But what is the correct answer – and do you actually need to seal your stone? The short answer: No. The long answer: Natural stone has survived for 1000’s of years without any chemical treatments, so it’s unlikely to fall to pieces without a layer of sealant that some suppliers insist it needs.

How long will Indian sandstone last?

Indian sandstone paving can have a very long lifespan if installed and maintained properly. With a cheap installer and poor care you can expect 2 – 10 years from your paving. With a solid base and repointing every few years you can in theory get 30 – 50 years from your paving or perhaps more.

Is sharp sand OK for pointing?

You need a soft sand., plenty of plastersicer, coarse sand is hard work trying to point with.

What is the best mix for laying slabs?

Paving slabs are bedded in a mortar mix with four parts sharp sand to one part cement. Measure your quantities using a shovel or a bucket – for example, four buckets of sand for every one bucket of cement.

THIS IS FUN:  Best answer: In which Coast Mumbai is located?

Should you seal sandstone paving?

You do not need to seal sandstone outside but this is your choice. … There are specialist algaecides, bleaches, rust removers, oil removers etc available on the market designed for natural stone patios and even if you seal a sandstone patio, algae and mildew will still form, as it will on any surface, just like glass.